Choosing a new hot water system in Perth: what we look at
Ashley Woolf,
A hot water system that fails is one of the most disruptive things that can happen at home. When you're choosing a replacement, the system matters, and so does who installs it.
This article explains what we look at when we help Perth homeowners choose a new hot water system, and why installation should be done properly. If you already know you need a system and want to book, go straight to our hot water service page.
Why the installer matters as much as the system
A lot can go wrong when a hot water system is installed badly, and it often goes unnoticed for a while. Common problems include:
- A system that's the wrong size for the household
- Poor pipe connections that cause hidden leaks and water damage
- Pressure problems that affect flow or damage the system
- Safety risks from a non-compliant installation
Hot water installation is licensed plumbing work, and gas systems also need a licensed gas fitter. We hold both: plumbing contractor licence PL 9348 and gas fitting licence GF 14901. A licensed plumber doesn't just connect a unit. We look at the layout of your home, how much hot water you use, your water pressure and what the Australian plumbing standards require.
What we look at when choosing a system
Hot water systems aren't one-size-fits-all. Before we recommend one, we talk through:
- How many people live there and when they use hot water, because a household with peak morning demand needs something different to a couple.
- What energy you have. Mains gas, electricity or bottled gas each suit different systems.
- Where the system will go. Space, access, ventilation and roof position all affect the choice.
- Your water pressure. It affects which systems work well and what fittings are needed.
- What you want from it. Some people care most about running costs, some about space, some about the environment.
Types of hot water systems in Perth
Electric
Storage electric systems are simple and suit homes without gas. Running costs depend on your tariff and how you use hot water.
Gas
Gas systems heat quickly and suit households that use a lot of hot water, if you have mains or bottled gas. They can be storage or instantaneous. Gas installation must be done by a licensed gas fitter.
Solar
Perth gets plenty of sun, so solar systems are worth considering. They need suitable roof space and usually a booster for cloudy days.
Heat pump
Heat pumps take heat from the air to heat your water. They work well in Perth's mild climate, but they need room and ventilation, and they make some noise outside.
A storage system must keep water at 60°C or more to be safe and compliant, and tempering valves are used to deliver safer water at taps. It's one of the things we check on any installation.
Signs your system may need replacing
- Water that doesn't stay hot, or temperature that keeps changing
- Banging, hissing or gurgling from the unit
- Rust or water around the base
- No hot water at all
- A system that's getting old
If you see water leaking from the tank or the unit, turn off the cold water supply to it at the isolation valve, switch off the power or gas if it's safe to, and call a licensed plumber. If you smell gas, leave the area, don't use switches, flames or phones near it, and turn off at the meter only if it's safe. Call the gas emergency line (ATCO Gas on 13 13 52 for natural gas in Perth, or your supplier for bottled gas) and then a licensed gas fitter.
Don't get a handyman to install it
Hot water installation involves plumbing, and gas or electrical connections, plus compliance with the plumbing standards. A botched job can mean leaks, system failure and safety problems. It also needs to be done by a licensed plumber under the law in WA.
Ready to book?
We install and replace hot water systems across Perth, and we'll talk through the options and the job before we start. To book, go to our hot water page, call (08) 6555 7757 or book online. If your hot water has failed out of hours, we have 24/7 emergency plumbing on the same number.
