
Taps, Toilets and Showers
- ★ 4.8 from 714 Google reviews
- Fully insured
We repair and replace taps, toilets and showers. Call when a tap drips, a toilet leaks or keeps running, or a shower leaks into the wall. These are plumbing faults. The cause is a worn part, a failed connector or a pipe that has started to leak.
Woolf Plumbing & Gas sends Ashley's team out from Forrestdale, and jobs across Perth stretch from Alkimos to Dawesville. PL 9348 is our plumbing contractor licence. Talk it through on (08) 6555 7757, or describe the job in the quote form.
This page sticks to the plumbing behind the fixture: tap cartridges and seats, mixers, pan connectors, cistern valves and the pipes in the wall. Below are the signs to look for, how we work through a fault, and real jobs from around Perth.
Signs of a plumbing fault and what causes it
A tap that drips after you turn it off is the plain sign. A toilet gives more. Water Corporation lists water pooling around the base, staining down the bowl, a noise after flushing and rusted metal parts. A leaking shower shows as water where it shouldn't be, like a wet wall or damp on the ceiling below.
On the jobs we've handled, the cause has been one of a handful of parts. A tap spindle has a worn washer, or its cartridge or seat has worn. A toilet's old flexible pan connector has failed, or the cistern has worn inlet and flush valves. A shower tap, or a pipe inside the wall, has started to leak.
Two checks help before you ring. Water Corporation says to put four or five drops of food colouring in the cistern and leave it for half an hour without flushing. Colour in the bowl means the toilet is leaking. For the whole house, it says to turn off every tap and appliance, note the three red numbers on the meter, and wait 15 minutes. If they've moved, water is escaping somewhere. It puts a leaking tap at up to 10,000 litres a year and a running cistern at around 9,000 litres. That adds up.
How we find the fault and fix it
We find the failing part before we touch anything. On a shower or tap, that can mean fitting a pressure gauge to the outlet and testing for leaks. Then we fix it.
- Taps: we take the spindle out of the body, cut a worn seat true with a reseating tool, and fit new washers or ceramic disc cartridges. A clogged aerator gets cleaned out. If the tap body is worn, we replace it.
- Mixers: the old mixer comes off, the new one goes on, and new braided flexible hoses are connected underneath.
- Toilets: we pull the toilet away from the wall, or break it out, to reach the pan connector. The old connector comes out and a new one goes in. When the whole toilet is being replaced, the new pan and cistern go onto a new connector or rubber collar.
- Showers: for a leak in the wall, we open the tiles at the rail outlet, fit new brass fittings to the pipework and render over the opening, ready for retiling. The retiling is another trade's job.
We protect your floors. A mat or drop sheets go down first, and shoe covers go on over carpet.
Recent jobs from around Perth
A tiled shower in Canning Vale got a new rail shower, a hand shower and a wall mixer in September 2026. We checked the rail with a spirit level as it went on.
A wall-faced toilet in Baldivis was leaking in August 2026. We pulled it out from the wall, replaced its old ribbed flexible pan connector with a new one fitted to the sewer collar, and put the toilet back with a push-button flush plate.
The kitchen wall taps in Bassendean were replaced in June 2026. The old tap body came out of the splashback. The seat in the tiled wall had corroded. We fitted a new brass tap body with chrome wall taps and a spout.
In Rockingham in October 2025 a pressure gauge on the shower rail outlet started a job on a leak behind the wall. Tiles came off at that spot so we could reach the leaking pipe, and the pipework inside the wall got a new brass elbow. The opening was then rendered, ready for retiling.
One job in Forrestfield in August 2025 covered both showers and taps. We cut a worn tap seat inside a tiled wall with a reseating tool and fitted new cartridges and new chrome cross-handle shower taps. New isolation valves and braided hoses went in under a kitchen sink, and a leaking old garden tap was replaced with a new brass one.
The areas behind these jobs
The jobs above are spread over four areas: South of the river, Rockingham and Peel, Perth hills and North of the river.
What you can do yourself, and what needs a plumber
Building and Energy lets a homeowner or occupier, or someone doing it for them unpaid, do five basic plumbing jobs. They can maintain, repair or replace a shower head, repair a tap (other than a thermostatic mixing tap), replace a cistern washer, replace a water filter cartridge, and clear a blocked fixture or waste pipe with a plunger. That's the full list. All other plumbing work in the home must be done by a plumber with a licence or permit.
A plumber has to show you their licence on request, and the Online Licence Search on the WA Government website checks it. Installing new fixtures counts as major work. Building and Energy says the plumbing contractor must then give you a certificate of compliance, which it calls your six-year guarantee.
When it's more than a tap, toilet or shower
If the meter keeps moving and you can't find the leak, leak detection is the next call. A burst pipe or water flooding the house is emergency plumbing. That runs 24/7. Kitchen sinks and laundry taps sit on our Kitchen and laundry plumbing page. A shower or basin going into a renovation is Bathroom renovation plumbing.
Not sure what has failed? Describe it when you ring (08) 6555 7757.
Frequently asked questions
Can a plumber fix my shower?
Yes, when the fault is in the plumbing: a worn tap cartridge or seat, a faulty mixer, or a leak in the pipework behind the wall. A Rockingham shower in October 2025 had a gauge test at the rail outlet, then a new brass elbow inside the wall.
Can a handyman fix a shower, or can I do it myself?
It depends on the fault. Building and Energy lets a homeowner or occupier, or someone helping unpaid, repair a tap and maintain, repair or replace a shower head. All other plumbing work must be done by a plumber with a licence or permit, and you can ask to see it.
How much does it cost to fix a dripping tap or a leaking shower?
It depends on the fixture and the fault, so we don't name a number before we know the job. Phone us or write via the quote form to get a quote. You'll hear the cost and timing before the job begins.
Does my tap need repairing or replacing?
Either can be right. It depends on what has worn. A worn washer, cartridge or seat can be fixed: in Forrestfield in August 2025 we cut a worn seat true and fitted new cartridges. When the tap body is worn or the seat in the wall has corroded, the body is replaced, as on a Bassendean kitchen in June 2026.
Why does my toilet keep running, and how do I check for a leak?
A running toilet points to the cistern, where the inlet or flush valve may be worn. A Baldivis cistern got a new dual-flush valve and inlet valve in August 2026. To check for a leak, use Water Corporation's colour test: food colouring in the cistern, half an hour, then look in the bowl.
Do I need a plumber to install a new toilet or shower?
Yes. Installing new fixtures is major plumbing work, so it needs a plumber with a licence, who then hands you a certificate of compliance. Building and Energy describes that certificate as your six-year guarantee.

